Hydraulic Motor

As a trusted hydraulic motor supplier we offer extensive, competitive access to big name, as well as less well-known, manufacturers from around the world – that’s because many branded motors can often be directly interchanged with those from smaller, niche hydraulic motor manufacturers… meaning that if timescales or budgets are not in your favour, then we can be!

We should perhaps just add that “less well-known” never means inferior quality; we refuse to compromise on that. Our ISO 9001 accreditation, means that we believe that the service and products you receive should be second-to-none, and that includes our hydraulic motor range.

The Hydraulics Online team are passionate about anything and everything hydraulic – but we don’t expect you to be! So if you don’t know what hydraulic motor you are looking for then it doesn’t matter, that’s what we’re here for. Our technical team will work with whatever information you do have, or even a photograph, if you are looking to replace an existing hydraulic motor.

And according to our customers we “know our stuff”:

“Just to let you know how impressed I am with your service. Not only did you recognise the hydraulic motor I needed, where others had failed to, but you were able to despatch a replacement to me incredibly quickly.”

We can supply a vast range of motors including: radial piston motorsaxial piston motorsexternal gear motorsGerotor and Geroler motors from manufacturers including: Bosch RexrothDenisonItalgroupMaxmaParkerRoquetSauer DanfossVickers and White Drive Products.

So, lets bring all this to life and showcase a handful of the thousands of customers we’ve helped to date…

The team were contacted by the owner of an offshore fishing vessel, that was stranded, unable to operate… every lost hour meant more lost revenue. Ouch! The Hydraulics Online team knew that the existing brand of hydraulic motor was on an uncomfortably long lead time, and instead sourced an “off the shelf” equivalent motor which was flown into the UK within 48 hours. No re-engineering was required and the loss to our customer’s revenue was minimised.

Moving on, a power transmission engineering company approached our technical team after one of their blue-chip client’s critical gearbox / hydraulic motor had failed, our customer having been unable to source a replacement hydraulic motor from their existing suppliers within an acceptable lead time. Our team identified the hydraulic motor immediately and a replacement identical hydraulic motor was purchased and air-freighted within 48 hours again to minimise downtime for the end customer.

A third customer, a national household power generation company, needed a replacement hydraulic motor following the failure of the main hydraulic starter (radial piston) motor on a LM6000 GT package. The original unit was a Bosch-Rexroth hydraulic motor and was on a long lead time. One of our hydraulic engineers visited the site within an hour of contact, identified the hydraulic motor and specified a suitable equivalent replacement Italgroup hydraulic motor, available from Hydraulics Online stock. This was delivered to site the same day, minimising downtime and getting the company up and running again.

“Hydraulic motor arrived this morning, it’s now fitted and our machinery is working perfectly. Thanks for your help in identifying what we needed… I will certainly recommend your service to all my contacts.”

Our catalogue shows a sample of some of the more popular hydraulic motors that we regularly supply, but it is only a sample – it’s impossible for us to list everything that we do! So if you can’t find the hydraulic motor that you’re looking for, complete our Stock Enquiry Form or for more technical advice contact one of our experienced technical team on: +44 (0)845 644 3640 or via: sales@hydraulicsonline.com.

And if we still haven’t convinced you to give us a try, then maybe reading more of our customer testimonials would do it? Go on, let us take the pressure!

Radial Piston Hydraulic Motor

At Hydraulics Online, we’re passionate about all things hydraulic, and simply love the diversity of our customer base and the vast range of applications that we’re involved with every day. Nothing ever fazes the technical team, who relish the challenges thrown at them… In fact, they’re regularly told that their hydraulic expertise is second to none!

We work with an extensive range of leading and lesser-known manufacturers from around the world on a daily basis too, one of these being Italgroup who have been producing radial piston hydraulic motors since 1985. Made entirely in Europe, Italgroup pride themselves on their innovative, customisable product range, offering quality and versatility; their radial piston hydraulic motors are also directly interchangeable with many competitors’ products.

As an example, a leisure & fairground attraction provider was due to attend a prestigious national event when their attraction’s main hydraulic drive failed. The replacement, competitor product was on a four week lead time, meaning that the ride would be out of operation for the whole event and all revenue lost. Our team were consulted and a suitable direct replacement was sourced from Italgroup and flown into the UK within 48 hours, with no re-engineering required. The customer was able to meet their commitment for the major weekend event and, critically, protected their revenue. Happy days!

Soon afterwards, following a search on the internet, Hydraulics Online were contacted by a shredding and data disposal company to design and supply an efficient hydraulic system to run a mobile compactor and crusher. Our technical team proposed a hydraulic system using Italgroup radial piston motors. The vehicle was delivered to Hydraulics Online’s premises and our hydraulic engineer installed the PTO driven power source and hydraulic control valves. A second vehicle has since been fitted out to the same specification.

We could go on, but as a final example, Hydraulics Online were contacted by a national household power generation company, following the failure of the main hydraulic starter (radial piston) motor on a LM6000 GT package. The original unit was a Bosch-Rexroth hydraulic motor and was on a long lead time. A hydraulic engineer visited the site within an hour of contact, identified the hydraulic motor and specified a suitable equivalent replacement hydraulic motor from Italgroup which was available from Hydraulics Online stock. This was delivered to site the same day, minimising downtime again and Hydraulics Online are now a preferred supplier for hydraulic equipment and components.

Hydraulics CatalogueYou can find lots more information here on Italgroup or you can hop over to our catalogue to view some of the Italgroup products we have within our range. This is, however, just a sample of some of the products that we regularly supply, so if you can’t find what you’re looking for, or aren’t even sure what you need then call us or complete our Stock Enquiry Form

 

Italgroup

Marine Winch Motor

Even the most well-established and reputable of hydraulic companies turn to the Hydraulics Online technical team when it comes to sourcing hydraulic equipment…

A UK company specialising in the service and repair of hydraulic equipment contacted us on behalf of a customer overseas who was looking for a radial piston motor to replace an existing unit used on a marine winch system.  Not only was the original motor now obsolete, but it also had a non-standard shaft.

Working from photos taken of the original unit, our technical team identified that an Italgroup (IAMD series) radial piston motor with a bespoke shaft would fit the bill nicely.

Italgroup’s European-made radial piston motors are available in displacements ranging from 20cc to 8000cc, with fixed and dual speed versions and can also be combined with planetary gearboxes, brakes and valves of various kinds. The range of Italgroup radial piston motors can also be directly interchanged with: Dinamic Oil hydraulic motors, Duesterloh (Dusterloh) motors, Staffa hydraulic motors (Kawasaki Precision Machinery), Calzoni radial piston motors, and Sai hydraulic motors.

Marine Winch

Some of the features of the IAMD series motor include:

  • fixed displacement;
  • displacement range between 200 cc/rev – 8000 cc/rev;
  • heavy duty motor;
  • higher mechanical efficiency, speed and power than standard IAM series;
  • interchangeable mounting face;
  • bespoke shafts for standard radial piston motors upon request.

Italgroup

 

Case Study: National Energy Supply

The Customer: National Household Power Generation Company

The Task: Hydraulics Online were contacted following the failure of the main hydraulic starter (radial piston) motor on a LM6000 GT package. The original unit was a Bosch-Rexroth hydraulic motor and was on a long lead time.

The Solution: A hydraulic engineer visited site within an hour of contact, identified the hydraulic motor and specified a suitable equivalent replacement hydraulic motor from Italgroup which was available from Hydraulics Online stock. This was delivered to site the same day, minimising downtime again.

Hydraulics Online are now a preferred supplier for hydraulic equipment and components.

Click through on the following links if you’d like to find out more about us and our customers, the markets and hydraulic manufacturers that we deal with and the hydraulic products and services that we can provide.

Remember, if it’s hydraulic we can design it, supply it, solve it or repair it!

Case Study: Marine & Offshore - Fishing

The Customer: Offshore Fishing Vessel

The Task: The customer’s trawler was stranded, unable to operate and therefore earn revenue. Hydraulics Online were approached to supply an alternative hydraulic motor to a competitor’s product which was on a long lead time.

The Solution: Hydraulics Online sourced an “off the shelf” equivalent motor which was then flown into UK within 48 hours, thus minimising the loss in revenue to the customer. No major re-engineering was required.

Click through on the following links if you’d like to find out more about us and our customers, the markets and hydraulic manufacturers that we deal with and the hydraulic products and services that we can provide.

Remember, if it’s hydraulic we can design it, supply it, solve it or repair it!

Case Study: Data Disposal

The Customer: Shredding and Data Disposal Company

The Task: Again, following a search on the internet, Hydraulics Online were contacted to design and supply an efficient hydraulic system to run a mobile compactor and crusher.

The Solution: Hydraulics Online proposed a hydraulic system using Italgroup radial piston motors. The vehicle was delivered to Hydraulics Online’s premises and our hydraulic engineer installed the PTO driven power source and hydraulic control valves. A second vehicle has since been fitted out to the same specification

Click through on the following links if you’d like to find out more about us and our customers, the markets and hydraulic manufacturers that we deal with and the hydraulic products and services that we can provide.

Remember, if it’s hydraulic we can design it, supply it, solve it or repair it!

Case Study: Leisure Industry, UK

The Customer: Leisure & Fairground Attraction Provider

The Task: Our customer was due to attend a prestigious national event when their attraction’s main hydraulic drive failed. The replacement, competitor product was on a four week lead time, meaning that the ride would be out of operation for the whole event and all revenue lost.

The Solution: Hydraulics Online were consulted and a suitable direct replacement was sourced from Italgroup and flown into the UK within 48 hours, with no re-engineering required. The customer was able to meet their commitment for the major weekend event and, critically, to protect revenue. Happy days!

Click through on the following links if you’d like to find out more about us and our customers, the markets and hydraulic manufacturers that we deal with and the hydraulic products and services that we can provide.

Remember, if it’s hydraulic we can design it, supply it, solve it or repair it!

Blog & Case Studies

Parker Pumps

With our competitive access to a vast range of hyd

July 20, 2016 read more

Happy Customers

You just can't beat going into your inbox to find

June 30, 2016 read more

News Archive

Contact Us

Phone:+44 (0)845 644 3640

Address:
Units 2+3 Townend Farm
Audley Road
Alsager
Cheshire
ST7 2QR
United Kingdom

Connect with us!

Facebook Twitter Linked In Pinterest Tumblr RSS