As a trusted hydraulic motor supplier we offer extensive, competitive access to big name, and less well-known, manufacturers from around the world…
That’s because a branded hydraulic motor can often be directly interchanged with those from smaller, niche hydraulic motor manufacturers… meaning that if timescales or budgets are not in your favour, then we can be!
We should perhaps just add that “less well-known” never means inferior quality; we refuse to compromise on that. Our ISO 9001 accreditation, means that we believe that the service and products you receive should be second-to-none, and that includes our hydraulic motor range.
The Hydraulics Online team are passionate about anything and everything hydraulic – but we don’t expect you to be! So if you don’t know what hydraulic motor you are looking for then it doesn’t matter, that’s what we’re here for. Our technical team will work with whatever information you do have, or even a photograph, if you are looking to replace an existing hydraulic motor.
And according to our customers we “know our stuff”:
“Just to let you know how impressed I am with your service. Not only did you recognise the hydraulic motor I needed, where others had failed to, but you were able to despatch a replacement to me incredibly quickly.”
We can supply a vast range of motors including: radial piston motors, axial piston motors, external gear motors, Gerotor and Geroler motors from manufacturers including: Bosch Rexroth, Denison, Italgroup, Maxma, Parker, Roquet, Sauer Danfoss, Vickers and White Drive Products.
So, let’s bring all this to life and showcase a handful of the thousands of customers we’ve helped to date…
Take the case of the owner of an offshore fishing vessel, that was stranded, unable to operate… every lost hour meant more lost revenue. Ouch! The Hydraulics Online team knew that the existing brand of hydraulic motor was on an uncomfortably long lead time, and instead sourced an “off the shelf” equivalent motor which was flown into the UK within 48 hours. No re-engineering was required and the loss to our customer’s revenue was minimised.
Moving on, a power transmission engineering company approached our technical team after one of their blue-chip clients reported a failure on a critical gearbox / hydraulic motor. Our customer had been unable to source a replacement from their existing suppliers within an acceptable lead time; solving the problem and delivering a high level of service to their client was crucial. Our team identified the hydraulic motor immediately and a replacement identical hydraulic motor was purchased and air-freighted within 48 hours again to minimise downtime for the end customer.
A third customer, a national household power generation company, needed a replacement hydraulic motor following the failure of the main hydraulic starter (radial piston) motor on a LM6000 GT package. The original unit was a Bosch-Rexroth hydraulic motor and was on a long lead time. One of our hydraulic engineers visited the site within an hour of contact, identified the hydraulic motor and specified a suitable equivalent replacement Italgroup hydraulic motor, available from Hydraulics Online stock. This was delivered to site the same day, minimising downtime and getting the company up and running again.
“Hydraulic motor arrived this morning, it’s now fitted and our machinery is working perfectly. Thanks for your help in identifying what we needed… I will certainly recommend your service to all my contacts.”
And if we still haven’t convinced you to give us a try, then maybe reading more of our customer testimonials would do it? Go on, let us take the pressure!
Searching for a hydraulic pump repair service? Look no further…
Just a quick email to thank you for the hydraulic pump repair. My neighbour is really grateful; he said that without the repair the machine would have just been “ferraille” (scrap). Guess I owe you a bottle of red!
When new customers ask what services we can offer, we keep it simple and say: “If it’s hydraulic we can design it, supply it, solve it or repair it…” That means that if you’re looking for a hydraulic pump repair service, then your search is over!
As with other hydraulic equipment, many of our well-repaired and refurbished hydraulic pumps are virtually indistinguishable to a brand new unit. Our service includes a free evaluation – having examined your existing pump to diagnose the extent of work needed, and ability to recover and re-use existing components.
When evaluating your hydraulic pump our team could offer recommendations to improve its design and productivity, so that you could reduce running costs and minimise the likelihood of any future downtime and hydraulic pump repair work. Our assessment may determine that a hydraulic pump repair is not feasible, not good value for money or simply not recommended. If this is the case then we will quote for a new, replacement new unit in addition to quoting for your hydraulic pump repair if appropriate.
Let’s give you a quick example to bring all this hydraulic pump repair talk to life: Our technical team received a phone call from a well-known, global oil company asking whether we could fix one of the pumps (a Parker, Commercial Intertech P15H 6 Section pump) in their system. We asked to see a quick photograph of the defective pump first, before confirming that, yes, we could undertake the repair. The pictures below show the pump, “before” and “after”… Not a bad looking makeover is it?
If a repair isn’t possible, or not what we would recommend, we may be able to offer a “direct equivalent” to your existing brand of hydraulic pump. This can be a particularly attractive option if you are up against tight timescales or budgets… but rest assured, it doesn’t mean compromising on quality. Ever. As an ISO 9001 accredited company, quality means everything to us. We want you to be able to “fit and forget” any equipment that we supply aside from undertaking routine servicing and maintenance, obviously.
Take the case of another large offshore oil company, who contacted the team looking for a Commercial Hydraulics P365/P330 tandem pump; they needed one urgently as they were in a breakdown situation on one of their accommodation rigs. The bad news was that the original Commercial Hydraulics pump was on an 18 week lead time, so that simply wasn’t an option for the customer. However, the good news was that we could offer a direct equivalent (pictured) to be supplied from stock… a quality product, constructed and tested in the UK. The customer placed their order instantly. Within 24 hours the pump had been assembled, tested and dispatched… before being flown to the accommodation rig by helicopter the very next day.
At Hydraulics Online we can offer direct equivalents to a vast range of hydraulic manufacturers. We’re always up for a challenge, and even if components are discontinued or seemingly obsolete, we can more often than not source an equivalent suitable to your application.
Some of the popular hydraulic pump manufacturers and brands that we can supply include: Adan, Atos, Bosch Rexroth, Breuninghaus, Bucher, Casappa hydraulic pumps, Commercial, Continental, Dowty hydraulic pump, Dynapower, Eaton, Eaton Vickers, Hamworthy, Hydromatik, Kawasaki, Linde, Parker, Permco, Poclain hydraulic pumps, Racine, RHL, Sauer Danfoss hydraulic pumps, Sauer Sundstrand, Salami hydraulic pumps, Tyrone, Uchida, Vickers and White hydraulic pumps.
We supply a variety of hydraulic pump types including: Gear pumps, rotary vane pumps, fixed displacement pumps / screw pumps, bent axis piston pumps, axial piston pumps, and radial piston pumps. We can help identify the pump that will be appropriate for your application, even if you’re not certain on what type of hydraulic pump you need.
So back to that hydraulic pump repair you were looking for. If you’ve read this far then you’re hopefully tempted to give us a try. So what are you waiting for? We promise you, your brand is in safe hands.