Commercial Hydraulics Pumps & Motors - P365 / PGP365 / PGM365 Series
Commercial Hydraulics pumps & motors – P365 / PGP365 / PGM365 series is available as a single or multiple pump / motors with piggyback and thru-drive configurations available.
- Speeds from 900-2400 rpm
- Fluid displacements up to 9.0 cir (147.5 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 90.7 gpm (343.3 lpm)
- Motor torque from 1705-3740 in-lbs (1964-4308 kg-cm) @ 2400 rpm
- High strength one-piece intergral shafts.
We understand that sometimes, you actually needed something “yesterday” and that your budget is always being asked to stretch that… little… bit… further. That’s why we also offer a range of completely interchangeable, direct equivalents to the Commercial pumps range. Built and tested here in the UK, you can be assured of a quality product that can more often than not be dispatched within 24 hours.
Please contact our experienced technical team if you for further information and advice on Commercial pumps and our direct equivalents.