Commercial Hydraulics Pumps & Motors - P350 / PGP350 / PGM 350 Series
Commercial Hydraulics P350 / PGP350 / PGM 350 series is available as a single or multiple pump / motors with piggyback and thru-drive configurations available.
- Speeds from 900-2400 rpm
- Fluid displacements up to 6.38 cir (104.5 ccr)
- Continuous pressures up to 3500 psi (241 bar)
- Intermittent pressures up to 4000 psi (275 bar)
- Output flows up to 64.8 gpm (245.2 lpm)
- Motor torque from 1265-2350 in-lbs (1457-2707 kg-cm) @ 2400 rpm
- High strength one-piece intergral shafts.
We understand that sometimes, you actually needed something “yesterday” and that your budget is always being asked to stretch that… little… bit… further.
That’s why we also offer a range of completely interchangeable, direct equivalents to the Commercial Hydraulics pumps range. Built and tested here in the UK, you can be assured of a quality product that can more often than not be dispatched within 24 hours. Hop over to the Hydraulics Online catalogue to take a look.