We supply a vast range of hydraulic pumps manufactured by leading and niche manufacturers alike. And if you’re up against particularly tight timescales or budgets we can offer direct equivalents to many of the better known hydraulic pump brands. We also offer a hydraulic pump repair service which may also provide an alternative cost-effective solution for you.
Browse our product listing below or contact us now using our online enquiry form, online chat, or via: email@example.com or on +44 (0) 845 644 3640.
ABOUT HYDRAULIC PUMPS:
The four most common designs are the: vane pump, gear pump, gerotor pump and piston pump. All are well suited to common hydraulic uses with the piston design best suited for higher pressures.
A fixed displacement pump creates a flow of fluid when its shaft is rotated in the proper direction and when its inlet is connected to a chamber (a reservoir or tank) filled with fluid. The outlet port may be connected to a passage leading to a fluid power system or exhausted into another chamber that is at a higher pressure. The higher pressure chamber must be equipped with a pressure limiting device. The output flow rate is fixed by the pump displacement per revolution.
A variable displacement pump's output flow rate is fixed by the pump displacement per revolution but can be varied by the operator in a manual or servo controlled system, depending on the design. The variable displacement type is particularly well suited in circuits using hydraulic motors where variable speeds and the ability to reverse is needed.