Parker Hydraulic Gerotor Motors

Parker gerotor motors…

PARKER MGG GEROTOR SERIES MOTORMGG Gerotor Series Motor: These Parker hydraulic gerotor motors operate at pressures of up to 138 bar (2,000 psi) and speeds up to 5,000 rpm. Light-weight, Integral Valve options, Roller bearing design, Bi-directional rotation, Aluminum construction. Sizes from 3.57cc – 11.48cc.

 

 

PARKER GEROTOR MOTORS 330 BAR 36 - 1000 CC - EUROPEGerotor Motors 330 Bar 36cc – 1000cc: Europe: This includes Parker Gerotor motors series TF/TG/TH/TK/TE/TJ. Parker Gerotor Motors have a compact design, dependable holding capability which enables simple installation for the tough agriculture and turf market requirements. Other features include: •high starting torque, reduced space capacity, suitable for •highly-demanding applications and a low speed capability.

Parker Torqmotor™ TF Clutch Medium Duty Motor

 

 

Torqmotor™ TF Clutch Medium Duty Motor adds an Industry-Unique Clutch to the Parker TF Motor: Thanks to diminished pressure at the work ports, the TF Clutch Series motor is separated from the output shaft which can freewheel. Pressure at either work port connects the motor and shaft. Intermittent pressures to 3000 psi, torques to 7000 lb-in. Shaft size 1.25″.

 

Parker Torqmotor™ TF Medium Duty Motor (up to 1-3/8' shaft)Torqmotor™ TF Medium Duty Motor (Up To 1-3/8 Shaft): Available in flange or wheel mounts, the Parker TF Series motor has intermittent pressure ratings to 4000 psi, torques to 8100 lb-in. Side load capability is 4000 lb on flange mounts, 6000 lb on wheel mounts. Shaft size 1.25″ nominal.

 

 

Parker Torqmotor™ TJ Light Duty MotorTorqmotor™ TJ Light Duty Motor with Increased Shaft Size for Higher Side-Load Capability (Up To 1-1/4″ Shaft): The Parker TJ Series marries the TE Series drive train with a larger and heavier roller bearing and shaft. This compact, economical wheelmotor has intermittent pressures to 2750 psi and torques to 5700 lb-in, side loads to 6000 lb. Shaft is 1.25″ nominal.

 

 

Parker Torqmotor™ TB Light Duty MotorTorqmotor™ TB Light Duty Motor with Increased Torque and Side-Load Capability (Up To 1″ Shaft): With DU and sintered copper/steel bushings, the Parker TB Series can carry side loads to 1,600 pounds, intermittent pressures to 2,750 psi, torques to 5,700 lb-in. Shaft size 1″ nominal.

 

 

Parker Torqmotor™ TC Light Duty Motor Torqmotor™ TC Light Duty Motor (Up To 1″ Shaft): The Parker TC Series is the most compact Torqmotor™ for lighter duty applications. Sintered copper/steel bushings for side loads up to 750 lb. With intermittent pressures to 1,750 psi, torques up to 2,700 lb-in can be obtained. Shaft size 1” nominal.

 

 

Parker Torqmotor™ TG Medium Duty Motor Torqmotor™ TG Medium Duty Motor for Increased Power and Durability (Up To 1-3/8″ Shaft): The Parker TG Series is available in flange or wheel mounts. Torques to 12,500 lb-in and displacements to 58.5 cu in. Intermittent pressures go to 4000 psi. Side load capability is 4000 lb on flange mounts, 6000 lb on wheel mounts. Shaft size is 1.25″ nominal.

 

 

Parker Torqmotor™ TGK Heavy Duty Motor Torqmotor™ TGK Heavy Duty Motor with Increased Power Density (Up To 1-1/2″ Shaft): The robust Parker TGK Series uses an extra heavy drive train in a standard size motor to deliver up to 18,600 lb-in torque, with intermittent pressure ratings to 4000 psi. Side load capability is 4000 lb on flange mounts, 6000 lb on wheel mounts. Shafts to 1.5″.

 

 

Parker Torqmotor™ TK Heavy Duty Motor Torqmotor™ TK Heavy Duty Motor Offers Torque, Power and Flow (Up To 1-3/4″ Shaft): The largest Torqmotor, the Parker TK Series is available in flange and wheel mounts. Torques to 23,500 lb-in, intermittent pressures to 4500 psi. Side loads to 6500 lb on flange mounts, 10,000 lb on wheel mounts. Flows to 60 gpm. Shaft size 1.5″ nominal.

 

 

Parker Torqmotor™ TS Light Duty Stainless Steel Motor Torqmotor™ TS Light Duty Stainless Steel Motor For Corrosive Environments or Underwater Applications (Up To 1″ Shaft): Designed specially to be utilised underwater or in corrosive environments, all external metal surface parts of these Parker hydraulic gerotor motors are stainless steel. Side load capacity is 400 lb. Intermittent pressures to 2,400 psi, torques to 2,000 lb-in. Shaft is 1″ diameter.

 

Parker Torqmotor™ TE Light Duty MotorTorqmotor™ TE Light Duty Motor For Higher Pressures with Roller Bearings for Increased Side-Load Capability (Up To 1″ Shaft): The only motor in its class with roller bearings, the TE Series can handle side loads of 2000 lb and resist the hammering given by chain and sprocket couplings. Intermittent pressures to 2750 psi, torques to 5700 lb-in. Shaft size 1″ nominal.

 

 

Parker Nichols™ 110A Medium Duty Motor Nichols™ 110A Medium Duty Motor with Thru-Shaft Capabilities (Up To 1-1/4″ Shaft): The most compact motor of its class, the Nichols 110A unique drive train has low internal stresses and long life. Available thru shafts for brakes, encoders. Intermittent pressures to 3000 psi, torque to 6700 lb-in. Side load to 1000 lb. Shaft 1″ nominal.

 

 

Parker Torqmotor™ TH Medium Duty MotorTorqmotor™ TH Medium Duty Motor With Increased Shaft Size for Higher Side-Load Capability (Up To 1-1/2″ Shaft): Available in flange or wheel mounts, these Parker hydraulic gerotor motors have 1.5″ nominal shaft size. This increases side load capability to 8000 lb on flange mounts, 10,000 lb on wheel mounts. Intermittent pressures to 4000 psi, torques to 12,500 lb-in.

 

 

Parker Torqmotor™ TL Medium Duty MotorTorqmotor™ TL Medium Duty Motor (Up To 1-1/4″ Shaft): The compact Parker TL Series wheelmotor has reduced length but has plenty of pulling power. Intermittent pressures are 3500 psi, torques to 10,000 lb-in. Side load capacity 6000 lb. Shaft size is 1.25″ nominal.

Contact us for more technical details and configuration options.

Testimonial: Rayne Precision Engineering

I have passed your cards onto a couple of our maintenance contractors and have given you a high recommendation to them both, so hopefully they too will be using in the future. Thanks for helping to get our repair solved so promptly.

Read More

Testimonial: Engineering Solutions

The valve arrived about 9:00am this morning. The service from you and Steve has been first class, so thank you very much. I shall certainly use your services again and recommend you to others. Thanks again and best regards.

Read More

Testimonial: Philippines

We would like to confirm receipt of your shipment for our initial order: PO# 07623. It was a pleasure having started working with you and we hope this is just the start of a good business relationship between our companies. Again, thank you very much and we look forward for more future business opportunities with you.

Read More

Testimonial: The Netherlands

Thank you for your service with selecting the proper pump. Pumps have arrived this morning and they completely conform with the old pumps.

Read More

Testimonial: Abernethy Trust

Please pass on my thanks to Steven for great customer service and his product knowledge; our gang mowers are back up and working.

Read More

Testimonial: Virginia

Please thank your team very much in helping me solve a pump issue. I needed a pump that was manufactured by a company no longer in business, and Steven was able to locate a duplicate that was manufactured by Parker.

Read More

Testimonial: Gwynedd

Thank you, Joanna. Mark’s quote was from a technical discussion which answered many questions that I have been trying to get without success from other suppliers. Please thank Mark for his time and expertise; it was so refreshing to have a knowledgeable person rather than a sales assistant.

Read More

Testimonial:Missouri

Just wanted to tell you that the pump fits and works perfectly. You were a big help, thank you.

Read More

Testimonial: Lift Company

Hi Mark, Thanks for sorting this out for me so quickly. Absolutely brilliant service… In this day and age it is so rare to come across a company with customer service to this level. Much appreciated.

Read More

Testimonial – Perth

Can you let the boys know that they are providing us with great service, parts and information in all our locations. Your service is prompt and reliable; you’re our “go to” guys when it comes to hydraulics.

Read More
New Monday, new week, new website! Today is the day we are launching our fresh and updated online experience. We’re [...] Read More
We’ve always known that our operations director, Helen is a force of nature, and it has been wonderful this week [...] Read More
Hydraulics Online has come a long way since it was founded in 2004 and, with our fifteenth-year anniversary just around [...] Read More
The decision to leap from a role within a giant tyre manufacturer employing 112,000 people worldwide to a family run [...] Read More

It’s official! We’ve got the vision! Hydraulics Online Co-founder, Helen Tonks has been shortlisted in the 2018 Enterprise Vision Awards […]

Read More

As their North West Business Exporter of the Year, the Federation of Small Businesses asked Hydraulics Online to speak at the 2018 […]

Read More

Hydraulics Online founders Mark and Helen recently had one of their most exciting interviews to date – with the radio […]

Read More

We did it again! Hydraulics Online is delighted to announce that we have been recognised as the North West Business Exporter […]

Read More

Mark’s entry into the fluid power industry was more than a little by chance but he now finds himself leading a […]

Read More

Federation of Small Businesses Award Finalist: North West Business Exporter of the Year We rarely take a step back to […]

Read More