Parker Hydraulic Gear Motors

Parker hydraulic gear motors…

Commercial Hydraulics are now part of the Parker Group, but before this Commercial had already established itself as one of, if not the, biggest world names in the manufacture of hydraulic pumps, hydraulic gear motors, hydraulic piston pumps, hydraulic flow dividers and hydraulic valves. Now, Commercial Hydraulics continues to lead the field and their series of Parker hydraulic gear motors / pumps are often called the industry standard by which all other hydraulic gear pumps are measured.

The range of Parker hydraulic gear motors includes:

Parker PGM 610 Hydraulic Gear MotorCast Iron High Pressure Motors – Model 610: Parker PGM 610 operates at pressures of up to 275 bar (4,000 psi) and speeds up to 3,300 rpm. Sturdy, tough, compact design ensures low noise and high through-drive power. There are a wide range of integral valve options. Sizes from 7cc – 32cc.

 

 

Parker PGM 505Aluminium High Pressure Motors – Model 505: Parker PGM 505 operates at pressures of up to 275 bar (3,988 psi) and speeds up to 4000 rpm. PGM 505 offers exceptional performance, allows optimum efficiency and low noise at high operating pressures. Sizes from 2cc – 13cc.

 

 

Parker PGM 511Aluminium High Pressure Motors – Model 511: Parker PGM 511 operates at pressures of up to 250 bar (3,625 psi) and speeds up to 4,000 rpm. PGM 511 offers exceptional performance, allows optimal efficiency and reduced noise at high operating pressures. Sizes from 3cc – 33cc.

 

 

Parker PGM 315 motorCast Iron Bushing Motors – Model 315: Parker PGM 315 operates at pressures of up to 241 bar (3,500 psi) and speeds up to 3,000 rpm. Three-piece Cast Iron construction, low-friction bushings deliver strength, high efficiency and long life in harsh operating environments. Sizes from 7.6cc – 40.6cc.

 

 

Parker PGM 330 motorCast Iron Bushing Motors – Model 330: Parker PGM 330 operates at pressures of up to 241 bar (3,500 psi) and speeds up to 3,000 rpm. Three-piece Cast Iron construction, low-friction bushings deliver strength, high efficiency and long life in tough operating environments. Sizes from 16cc – 65cc.

 

 

Parker PGM 350 motorCast Iron Bushing Motors – Model 350: Parker PGM 350 operates at pressures of up to 241 bar (3,500 psi) and speeds up to 2,400 rpm. Three-piece Cast Iron construction, low-friction bushings deliver strength, high efficiency and long life in rough operating environments. Sizes from 21cc – 105cc.

 

 

Parker PGM 365 motorCast Iron Bushing Motors – Model 365: Parker PGM 365 operates at pressures of up to 241 bar (3,500 psi) and speeds up to 2,400 rpm. Three-piece Cast Iron construction, low-friction bushings offer strength, high efficiency and long life in harsh operating environments. Sizes from 44cc – 147.5cc.

 

 

Parker PGM 620 motorCast Iron High Pressure Motors – Model 620: Parker PGM 620 operates at pressures up to 275 bar (4,000 psi) and speeds up to 3,300 rpm. Tough, durable, compact design ensures less noise and high through-drive power. Includes a wide range of integral valve options. Sizes from 19cc – 50cc.

 

 

Parker PGM 640 motor Cast Iron High Pressure Motors – Model 640: Parker PGM 640 operates at pressures up to 275 bar (4,000 psi) and speeds up to 3,300 rpm. Strong, durable, compact design to low noise and high through-drive power. Includes a wide range of integral valve options. Sizes from 30cc – 80cc.

 

 

Parker PGM 031 motorCast Iron Roller Bearing Motors – Model 031: Parker PGM 031 operates at pressures of up to 200 bar (3,000 psi) and speeds up to 2,400 rpm. High tensile Grey Iron, manufactured for high-torque applications with unique pressure balanced thrust plates for a better performance. Sizes from 16.2cc – 64.6cc.

 

 

Parker PGM 051 motorCast Iron Roller Bearing Motors – Model 051: Parker PGM 051 operates at pressures of up to 200 bar (3,000 psi) and speeds up to 2,400 rpm. High tensile Grey Iron, made for high-torque applications with unique pressure balanced thrust plates for  a better performance. Sizes from 21cc – 105cc.

 

 

Parker PGM 076 motorCast Iron Roller Bearing Motors – Model 076: Parker PGM 076 operates at pressures up to 200 bar (3,000 psi) and speeds up to 2,400 rpm. High tensile Grey Iron, designed for high-torque applications with unique pressure balanced thrust plates for a better performance. Sizes from 50cc – 202cc.

 

We understand that sometimes, you actually needed something “yesterday” and that your budget is always being asked to stretch that… little… bit… further. That’s why we also offer a range of completely interchangeable, direct equivalents to the Parker hydraulic gear motors. Built and tested here in the UK, you can be assured of a quality product that can more often than not be dispatched within 24 hours. Contact us for further information.

 

Testimonial: Rayne Precision Engineering

I have passed your cards onto a couple of our maintenance contractors and have given you a high recommendation to them both, so hopefully they too will be using in the future. Thanks for helping to get our repair solved so promptly.

Read More

Testimonial: Engineering Solutions

The valve arrived about 9:00am this morning. The service from you and Steve has been first class, so thank you very much. I shall certainly use your services again and recommend you to others. Thanks again and best regards.

Read More

Testimonial: Philippines

We would like to confirm receipt of your shipment for our initial order: PO# 07623. It was a pleasure having started working with you and we hope this is just the start of a good business relationship between our companies. Again, thank you very much and we look forward for more future business opportunities with you.

Read More

Testimonial: The Netherlands

Thank you for your service with selecting the proper pump. Pumps have arrived this morning and they completely conform with the old pumps.

Read More

Testimonial: Abernethy Trust

Please pass on my thanks to Steven for great customer service and his product knowledge; our gang mowers are back up and working.

Read More

Testimonial: Virginia

Please thank your team very much in helping me solve a pump issue. I needed a pump that was manufactured by a company no longer in business, and Steven was able to locate a duplicate that was manufactured by Parker.

Read More

Testimonial: Gwynedd

Thank you, Joanna. Mark’s quote was from a technical discussion which answered many questions that I have been trying to get without success from other suppliers. Please thank Mark for his time and expertise; it was so refreshing to have a knowledgeable person rather than a sales assistant.

Read More

Testimonial:Missouri

Just wanted to tell you that the pump fits and works perfectly. You were a big help, thank you.

Read More

Testimonial: Lift Company

Hi Mark, Thanks for sorting this out for me so quickly. Absolutely brilliant service… In this day and age it is so rare to come across a company with customer service to this level. Much appreciated.

Read More

Testimonial – Perth

Can you let the boys know that they are providing us with great service, parts and information in all our locations. Your service is prompt and reliable; you’re our “go to” guys when it comes to hydraulics.

Read More
Multi award-winning Alsager firm Hydraulics Online is gearing up for more success this year having recently been shortlisted as a [...] Read More
New Monday, new week, new website! Today is the day we are launching our fresh and updated online experience. We’re [...] Read More
We’ve always known that our operations director, Helen is a force of nature, and it has been wonderful this week [...] Read More
Hydraulics Online has come a long way since it was founded in 2004 and, with our fifteenth-year anniversary just around [...] Read More
The decision to leap from a role within a giant tyre manufacturer employing 112,000 people worldwide to a family run [...] Read More

It’s official! We’ve got the vision! Hydraulics Online Co-founder, Helen Tonks has been shortlisted in the 2018 Enterprise Vision Awards […]

Read More

As their North West Business Exporter of the Year, the Federation of Small Businesses asked Hydraulics Online to speak at the 2018 […]

Read More

Hydraulics Online founders Mark and Helen recently had one of their most exciting interviews to date – with the radio […]

Read More

We did it again! Hydraulics Online is delighted to announce that we have been recognised as the North West Business Exporter […]

Read More

Mark’s entry into the fluid power industry was more than a little by chance but he now finds himself leading a […]

Read More